Intensive 9-day Kitchen Fitting Course.  Limited Spaces

person highlighting where two worktops join

Kitchen Fitting Course Learner Review

Friendly atmosphere and helpful attitude of all staff. Really liked cutting worktops, pelmet, cornice. All tips and tricks from tutor. An excellent course. We had all the tools we needed.

Robert Peek, Kitchen Fitting Course

You are welcome to arrange to visit our centre to see one of our kitchen fitting courses in action and see the high standard of work that all learners achieve.  Our  courses are limited to 10 people and they fill up quickly so visit now and book a place.  Join thousands of satisfied customers who have learned a trade with us.

This 9 day kitchen fitting course is aimed at giving you the skills needed to install a kitchen from planning kitchen layouts to installing a kitchen including base units, wall units and larder units, fitting cornice/pelmet and plinth and the all important worktop cuts including cutting out for a sink and cooker hob and completing the required mitre cuts (secret joints) and finish with with worktop edging.

This kitchen fitting course, as with all our training courses, is intensive and aimed at providing you with as much quality training as possible in the time you are at the centre, therefore you will spend every hour of every day learning and practicing.

This kitchen fitting course is practical based and classroom time is kept to a minimum.

Spaces are limited to 10 people on a course at any one time and each person will have all tools and materials provided.

This course is currently only available as part of an ELC funded package.

Throughout this kitchen fitting course you will work in your own bay and will fit the complete kitchen yourself.  All tools and materials are provided.

During this course you will complete the following to a high standard:

  • Using hand and power tools required to successfully install a kitchen so that you are confident in using them which will improve the quality of your work and the reduce the time it takes.
  • Materials – understand the different units, worktops and finishes for a kitchen and understand the difference in quality as well as things to consider when recommending and installing these items.
  • Kitchen Plans – how to read plans and how to advice and plan kitchen layouts to meet customer requirements.
  • Install base, wall and larder units into your training bay.
  • Install end panels, corner posts, etc.
  • Cutting of worktops using a worktop jig and router and cutting out for sinks and cooker hobs and completing mitre cuts / secret cuts and bolt together worktops.
  • Fitting cornice/pelmet and plinth.
  • Hanging and levelling doors and fitting handles.
  • Understanding the different methods used to price jobs, dealing with customers and overcoming problems that may arise. You will also be provided with support after completing your course and you are able to contact your tutor by email, phone or call into the training centre to discuss your queries related to quoting for work.
  • Fully answer all your questions related to the trade, you are taught by experienced tradesmen with a passion for the trade, ask as many questions as you wish during the course. You will never hear anyone say ‘We don’t cover that on this course’ we employ experts in each field so they are able to answer all your questions.
  • Full support after completing your course.  If you have any questions relating to anything that you have covered on your course you are free to contact your tutor or the centre, by telephone, by text message, by whatsapp, by email or by calling into the centre. There is no charge for this and you can call at anytime in the future.

This kitchen fitting course is designed for people with little or no previous experience in kitchen fitting and is attended by people of all ages, and both male and female. The usual age range of people attending our kitchen fitting courses is mid twenties to mid fifties although the youngest person to attend a course at our centre was 18 and the oldest was 72 years old.

Our kitchen fitting courses are suitable for people who wish to learn a new trade so they can change their career, for existing tradespeople to learn additional skills, for people who wish to learn the skills to complete kitchen fitting work on their own properties and for people who wish to learn a trade to supplement their income.

If you are unsure if the course is suitable please arrange to visit our centre when a kitchen fitting course is running to speak with staff and see the high standard of work produced by all learners on the course.  If you are unable to visit our centre we can arrange for our tutor to give you a call, to answer any questions you have.

Our kitchen fitting courses are taught by an experienced carpenter/kitchen fitter who has over 35 years experience in the trade.

All tutors will give you contact details so if you have any questions after completing our courses you can just give us a call.

So if you are wanting to change jobs and learn a trade at a centre where they know what they are doing and will help you succeed give us a call.

Support provided when choosing a course

We will provide you with as much information, advice and guidance as we possibly can and if we are not able to offer you the course that best suits your needs or give you the information you require we will signpost you to somewhere that is able to. We do not pressure you to book onto any course and if we feel that you would be better suited to a course we do not offer then we will give you the contact information of a college that does.

Hopefully the majority of the information you require is available on this website but if you have any questions at all then please contact us and we will help in any way we can.

We would like to invite you to attend the training centre to view the facilities and discuss the course with both the tutors and current learners. We suggest if possible that you visit our centre towards the end of a course as people in general are always happy at the beginning of training and you want to make sure that they are as happy at the end of the course. When you visit you will be free to discuss the course with current learners on a 1-to-1 basis, if someone has paid good money or used limited funding to attend a course and they are not happy they will definitely tell you. If you visit towards the end of a course you will also be able to see the standard that everyone on the course has achieved.

One of the most popular comments we receive on questionnaires is that people did not expect to reach the high standard that they do on a course, it is also one of the most popular negative comments that we receive by people who are not aware of what we offer as they will say ‘you won’t be any good after 10 days’, if you yourself are unsure then why not pop down for a pressure free look around.

During Training

During your time with us every member of staff will do their best to help you achieve your aims. You will be provided with supporting literature relating to your trade and have access to further reading to research the trade further in your own time.

If you struggle on any element of the course then we will provide additional training at no extra cost to ensure that you reach the required standard.

If you have any learning difficulties or disabilities or have any physical difficulties or disabilities then we will support you throughout and this additional support will remain between the centre and the individual. The majority of the training courses are practical based but if you do have any concerns then please contact the centre.

We will also provide you with additional IAG relating to progression routes available after completing the course including further training, finding employment and starting to work for yourself. Whilst on a course please contact a member of staff if you require any further in information.Whilst you are at the centre there may be other courses running so if you have any questions relating to another trade please feel free to speak to the relevant tutor – they are all here to help you.

After Training

We will continue supporting you after you have completed a course with us and you can contact us either by email, phone or in person to discuss any aspects that you covered on your course. For example you may wish to contact us to clarify how to complete a job or how to price a job or maybe to ask for information on writing a business plan.

Your tutors will give you their contact telephone numbers and email address so if you have any questions at all you can give them a call. It is invaluable to have this continuous support available and will give you the confidence to complete work away from the centre.

The commitment to putting the needs of learners at the heart of everything the service does was demonstrated in the ways support is provided. Extract from Matrix Assessment Report

Learning a new skill was what I needed to better my chances for a career change.  The tutor and college made every aspect of the course interesting/useful from start to finish.  Probably one of the most understanding companies I’ve come across. Helped me with health issues whilst on course – Martin Pearson

We are not currently taking bookings for this 9-day kitchen fitting course.

The course is 9 days in duration, Monday to Thursday from 9am until 5pm and Fridays from 8am until 1pm.

Our centre based in Stoke-on-Trent, ST6 2DJ.  Please arrive at the training centre at least 15 minutes before the course start time.

The cost of this kitchen fitting course is £995 INC VAT. You only need to bring yourself, work clothes and footwear and your lunch, we will provide everything else.

We ask for a non-refundable deposit of £150 to secure your place on our plastering course and full payment as per our booking terms and conditions.

You can pay for this kitchen fitting course either via bank transfer, debit or credit card.

This 9 day kitchen fitting course can be attended as part of an ELC course.  If you have ELC funding available due to leaving the armed forces please contact us as we have specific ELC approved courses available.

Our training centre is based in Stoke-on-Trent, Staffordshire, ST6 2DJ.  We have no other training centres anywhere else in the UK and we are not associated with any other training providers.

There are several hotels and B&Bs within 5/10 miles of our training centre.

Below is feedback from people who have attended our kitchen fitting courses.  All feedback forms from everyone who completes our courses are available at the centre.

The most interesting/useful part of the course was that we’re dealing with a complete project as well as skill sets… The use of real tradespeople who have experience of the work. Kam Atwal. Kitchen Fitting course

A perfect course for a complete beginner – tutor guidance was second to none and provides and excellent foundation… Friendly environment… not rushed and enough time to practice. Dorothy Martin, Kitchen Fitting Course

The tutor was excellent, highly recommended. Kevin Sidebottom, Kitchen Fitting course

Came on the course with no knowledge at all in kitchens and have left confident of installing a kitchen from scratch. Instruction was delivered in a relaxed manner and I think two weeks is the right amount of time for students to pick it up. Had a great time. Darren Gotheridge, Kitchen Fitting Course

Friendly atmosphere and helpful attitude of all staff. Really liked cutting worktops, pelmet, cornice. All tips and tricks from tutor. An excellent course. Luciano was a good instructor with an easy manner. We had all the tools we needed. An excellent course. Robert Peek, Kitchen Fitting Course

Realistic atmosphere & friendly staff. The many top tips passed on by a very experienced tutor. Hands on with all the tools and cabinets etc. Thanks to everyone. Alex Goldie, Kitchen Fitting course

I liked that the course was hands on and that I got time to try all the jobs needed to do my kitchen in my bay. I enjoyed cutting and fitting work tops, cutting and fitting cornice and pelmets. Phillip Roberts, Kitchen Fitting Course

Excellent enthusiastic tutors in all subjects. I enjoyed planning the layout of the kitchen. Practicing using the router on work tops. Paul Tyrer, Kitchen Fitting Course

All of the staff are excellent, very knowledgeable, personable and approachable. I enjoyed planning and design techniques used during the fitting process including mitre joints and adjustment. Andrew Tibbets, Kitchen Fitting Course

We are not currently taking bookings for this 9-day kitchen fitting course..  The course is only being offered as part of an ELC funded course.

Our courses are very popular and book up quickly and as we only have 10 spaces on each course the course dates below maybe full before we have time to update this website.  Also it is worth noting that as we are flexible with customers, we do allow them to change course dates and so spaces may become available before we have had time to update the website.  It is worth adding your details to our reserve list as we will contact people on the list first to offer new spaces.  To be added to our reserve list, email your contact details to enquiries@tradeteacher.co.uk

We are not currently taking bookings for our standalone 9-day kitchen fitting course.  Please feel free to email contact details to add your details to our reserve list.

You are Taught by Experienced Tradespeople.

Our kitchen fitting courses are intensive but taught in a relaxed, friendly and professional manner by an experienced kitchen fitter.  We will fully support you when you finish your training course so you will be confident using your new found skills, after completing any kitchen fitting training with us you are able to call into the centre or contact your tutor directly to discuss anything that you covered on your course.

More Training for your Money.

Less classroom time, more tools in hands time.  Although our kitchen fitting courses are short they are very intensive and you will be in your bays completing practical work on day 1.  

It is also important when completing a kitchen fitting course that you fitting the kitchen yourself.  If you are fitting it as a pair you risk not getting to practice all elements yourself.  When deciding on which training centre to attend take the time to compare sizes of training bays and visit a centre when a course is on to speak with learners and see the standard of with the produce. 

Regular Start Dates.

We have kitchen fitting courses starting every two weeks, throughout the year.  We do not close for bank holidays, half terms, college summer holidays.  We only close for two weeks at Christmas.  Please feel free to contact Dave on 01782 837007 or via enquiries@tradeteacher.co.uk or dave.hare@tradeteacher.co.uk and he will work with you to plan dates.

Very good value for money and I have learned a lot in just two weeks of training.  The tutors are all very knowledgeable and as always there is a very welcoming atmosphere with everyone wanting to help you. John Sparham, 10 day kitchen fitting course

I would recommend this course to others.  Practical based, tutor and college is a great place to learn.  I found the tutors tips and advice on overcoming problems you might find on a job interesting. Stewart Riddle, 10 day kitchen fitting course

Great course, all about being hands on.  Brilliant tutor.  Friendly staff, always there to help, but its the hands on approach and I feel that is the only way you can learn. Ryan Campbell, 10 day kitchen fitting course

Other Construction Courses

More about us and our plastering courses.

Our kitchen fitting courses are taught by an experienced kitchen fitter who has 35+ years experience working as a kitchen fitter and running their own business. All tutors will give you their contact details so if you have any questions after completing our courses you can just give them a call. So if you are wanting to change jobs and learn a trade, at our a centre our tutors they know what they are doing and will help you succeed.  We have many, many years experience re-training people who are looking at learning a new skill to change careers. We have been selected for two visits from MP’s due to the work we have done retraining people facing redundancy. We know what we are doing and we know what you can do.

Our kitchen fitting training courses are ideal if you wish to learn to plaster, as they have been designed by experienced and qualified kitchen fitters and are aimed at giving you knowledge and skills in kitchen fitting as well as the confidence to use your kitchen fitting skills. You are taught the skills you need to complete the majority of kitchen fitting work that customer want you to complete.

Our kitchen fitting courses are intensive but taught in a relaxed, friendly and professional manner by experienced kitchen fitting who are approved to deliver training. We will fully support you when you finish your training course so you will be confident using your new found skills, after completing any kitchen fitting training with us you are able to call into the centre or contact your tutor directly to discuss anything that you covered on your course.

We are based in the Midlands and close to major motorways, train stations and airports. Local accommodation is available at a reduced rate and we can advice and/or arrange this if you wish. People travel from throughout the UK for our construction courses.  People have travelled from Manchester, Kent, South Shields, Liverpool, North East, Portsmouth, Birmingham, Bournemouth, Scotland, North Wales, Leeds, Derby, West Midlands, Bristol and the North West to attend our plastering, plumbing, tiling, carpentry, kitchen fitting, bricklaying and electrical courses.  We have also had people fly in from Ireland, France, Spain, Canary Islands, Germany, USA, Australia and Brunei to attend a course with us.  We are definitely worth travelling to – you are investing in your future.

Our training centre in Stoke-on-Trent has approx 10,000 square feet of purpose built training facilities.

The courses on offer are ideal to help you achieve your aims be they:

  • You may be an experienced trades person wishing to add new skills to your portfolio or needing to achieve relevant qualifications, or
  • You may be interested in a career change or wish to earn an additional income and have no previous experience, or
  • You may be facing redundancy and need to re-train to start a new career, or
  • You may be part of an organisation who wish to train their staff to increase confidence and build a multi skilled workforce, or
  • You wish to learn a trade to enable you to complete work of a high standard on your own property or for family members

Join 1,000’s Of Students Who Have Successfully Completed a Course With Us

Become Part of Our Success Stories